Jump to a Category:
Bob’s Jewelry Box – Viewer Project
When I introduced myself on the site, I said I was working on a jewelry box for my daughter. Well, after about 20 hours and a lot of mistakes because I made it up as I went, here it is. I looked at a lot of pictures on the web and formulated my own plan with ideas from a lot of them and of course my daughter’s input.
Check it out!Jeff’s Jewelry Box – Viewer Project
The Jewelry Box was my wife’s anniversary present this past June. I’m new to woodworking and I learned a lot in the process of ‘creating’ the design and I’ve learned a lot from your videos. Seriously, thanks for what you do.
Check it out!Phil’s Knife Block – Viewer Project
A unique take on a kitchen classic!
Check it out!Aaron’s Knife Block – Viewer Project
Recovering from mistakes brings out a unique version of the Popular Woodworking “I Can Do That” knife block.
Check it out!Devin’s Knife Block – Viewer Project
A custom knife block made from maple, walnut, and bamboo skewers.
Check it out!A Memorable Father’s Day Gift – Viewer Project
This was my first creation that was not to serve a purely utilitarian use. This was a Fathers Day gift for my Dad who is a minister.
Check it out!CD Storage – Viewer Project
A beautiful CD storage case inspired by the Gadget Station.
Check it out!Maple Bunk Bed – Viewer Project
It is basically modified from Rockler’s Bunk Bed Plan, made from Maple with a few coats of water-based poly, for my youngest daughter. She has the smaller bedroom and uses the top bunk as a loft space for hanging out and reading (loves to read).
Check it out!Hanging File – Viewer Project
A hanging file made from maple and walnut, built by Chet who from Camas, Washington.
Check it out!Cherry and Walnut Bed – Viewer Project
I have finally finished my bed project! Here’s the story. I designed this bed by jotting down some ideas and it evolved as I worked. It has taken me well longer than it should have, but it’s finally done. I used mostly cherry, some walnut for the beading, and cherry ply for the panels.
Check it out!Bubinga Sideboard – Viewer Project
Sideboard begins as a dovetailed case. Double thickness sides let me make the half-blind dovetails the easy way. That approach also means the sides and legs are flush on the inside, with a slight reveal on the outside.
Check it out!Maple and Cherry Sideboard – Viewer Project
A beautiful Sideboard submitted by Pierre-Alexandre Aka “Loupitou”.
Check it out!Black Walnut Chair – Viewer Project
I have the highest respect for chair makers. Its such a great combination of form and function and its a great test of a woodworker’s abilities in both design and construction. Let’s check out this beautiful chair built by Cameron in North Carolina.
Check it out!Gerald’s Chest of Drawers and Doll Desk – Viewer Project
My wife’s sister asked that I build her son a chest of drawers similar to one that she had seen in a furniture store near her house. It was a painted item of poor quality. This would be my first opportunity to design and create a piece from start to finish.
Check it out!Germain’s Shadow Box – Viewer Project
I finally finished the shadow box I’ve been working on for many weeks. I want to thank Marc for all the inspiration and assistance he provided on this project. This alone was worth my TWW Guild membership.
Check it out!Tack Trunk – Viewer Project
I built this for my girlfriend to use as a tack trunk to keep at the barn where she boards her horse. It is made from walnut with a aromatic cedar bottom for both the trunk and sliding tray. I went with a no fuss finish using Watco Danish oil.
Check it out!Matt’s Sculpted Rocking Chair – Viewer Project
I thought I’d pass along photos of a rocking chair I made out of curly and quilted maple from Hal Taylor’s plans and made some changes as I saw fit. It took me about 90-100 hours to build one chair after making all the necessary jigs and buying all the necessary drill bits, tools, etc.
Check it out!Hammer Dulcimer – Viewer Project
The pinnacle of my woodworking experience thus far is a hammer dulcimer I made from a kit sold here in Stillwater, MN. It has a Baltic birch frame with a red cedar soundboard.
Check it out!Nate’s “Growing from the Heart” – Viewer Project
I turned this for my little brother out of a piece of his fire wood (lodge pole pine) and some padauk. I call it “Growing from the Heart”.
Check it out!Neil’s Origins Table – Viewer Project
I really want to share this project with woodworkers because it has proven that I have to, like you say, think out of the box.
Check it out!Corner Coffee Table – Viewer Project
Here is the latest project that I finished. It is a coffee table for a corner sectional couch.
Check it out!Jewelry Chest – Viewer Project
This cabinet was my first big project. The toughest part for me was preparing the lumber since I do not have a planer, bandsaw or thickness planer.
Check it out!Afzelia (Doussie) Lamp Table – Viewer Project
The inspiration for this project came from two sources; my wife who loves Asian style furniture, artifacts and art, and a picture of a similar but taller plant stand done by Yeung Chan whom I met at a woodworking show.
Check it out!Jim’s End Tables – Viewer Project
This is my most ambitious furniture project to date and one I am verrry happy to be finished with. Needless to say, my wife is happy also. She wanted two new end tables to replace the nice, but 30 year old ones we had in our living room.
Check it out!Nick’s Workbench – Week of Workbenches
It’s just a pretty traditional cabinetmaker’s workbench. Its made of soft maple and pine for the base with big dovetails and all!
Check it out!Check it Out!
Premium Membership
Keep Up With TWW!
Shop our Affiliates
Latest Video
Proud to be Sponsored By:
Support our Advertisers
