A shorter show this week with a lot packed in: the double table saw setup is officially happening, Marc and Greg tag-team card scraper sharpening, and we spend some real time on what to…

A jam-packed show, mostly unscripted, with one real piece of news: the flaming Powermatic PM2000 is finished, and after a poll that went the other way, Marc is keeping both table saws….

This one was almost entirely off the cuff. Greg dropped a few notes in the show doc that morning, and past that we just hit start and talked. Which, as it turns out, is apparently what…

Nothing about this show went to plan. Marc tried a new dual-stream setup so we could go live vertically on Shorts and Instagram at the same time, it refused to cooperate, and we ended up…

This week Marc and Nicole worked through a stack of member and chat questions: secondary bevels, rust spots on a saw table, how long glue and finish actually last, what to look for in a…

MENTIONED IN THIS EPISODE Is Traditional Finishing Dead? (free article) https://thewoodwhisperer.com/articles/is-traditional-finishing-dead/ American Mantelpieces by Gary Katz and Todd…

We are back. After a long pause, the Woodworking Morning Show returns with new segments, your preloaded questions, and a Guild course giveaway. Live every Friday at 10 am Central….

00:00 Introduction and Greetings 00:37 Catching Up with the Community 01:11 Health Updates and Humor 01:58 Convention Memories 02:46 Introducing Ourselves 04:45 The Evolution of the Show…

Show Notes! 00:00 Introduction and Greetings 00:40 Vacation Talk 01:00 Nicole’s Vegas Adventures 01:18 Podcasting Journey 02:08 Recommending Movies 02:34 Morning Stream Community…

00:00 Introduction and Lighting Setup 00:44 Welcome to the Woodworking Morning Show 00:59 Clock Troubles and Fixes 01:33 Introducing the Hosts 01:42 Merchandise and Social Media…

00:00 Introduction and Greetings 00:41 Setting Up the New Recording Space 01:50 Welcome to the Woodworking Morning Show 02:00 National Pet Day 02:18 Duggee the Bulldog…

Join this channel to get access to perks: https://www.youtube.com/channel/UCKp44bWWZIiOPShPN_ytShw/join Sign up for our free newsletter to be notified of a new video, our live show or…

This is our new time! 10am Eastern/7am Pacific 00:00 Good Morning! 01:09 Spring Break Chaos 01:46 Schitt’s Creek Reference 02:02 Woodworking Morning Show Begins 02:16 Audience…

Show Notes Coming Soon Some of our Amazon Black Friday finds! https://www.amazon.com/shop/thewoodwhisperer/list/3LO3RFEF8Q5DT?ref_=aip_sf_list_spv_ofs_mixed_d Check out the NEW Guild+…

Would you like your questions pre-loaded into the show? Join our YouTube Members or Patreon . A post goes out every Wednesday in these groups for you to ask your question if you can not…

Would you like your questions pre-loaded into the show? Join our YouTube Members or Patreon . A post goes out every Wednesday in these groups for you to ask your question if you can not…

Would you like your questions pre-loaded into the show? Join our YouTube Members or Patreon . A post goes out every Wednesday in these groups for you to ask your question if you can not…

Would you like your questions pre-loaded into the show? Join our YouTube Members or Patreon . A post goes out every Wednesday in these groups for you to ask your question if you can not…

Would you like your questions pre-loaded into the show? Join our YouTube Members or Patreon . A post goes out every Wednesday in these groups for you to ask your question if you can not…

00:00:00 Countdown to Good Morning 00:01:02 We’re back from WIA! 00:04:20 The history of Woodworking in America 00:04:50 Alex’s Instagram https://www.instagram.com/dolese_woodworks…

00:00:00 Countdown to Good Morning! 00:00:30 Marc leaves Nicole to do the show on her own 00:02:14 Good Morning! Welcome to the Woodworking Morning Show 00:02:26 Preview of our first…

00:00:00 Good Morning! 00:02:06 Guild+ has launched! https://thewoodwhispererguild.com/plus 00:03:33 We loved the Barenaked Ladies show at The Factory! 00:05:05 Crap Marc ordered from…

00:00:00 Good Morning! 00:01:59 Giveaways later in the show https://backsidesandpaper.com/ 00:02:49 Do you want to see my chisel storage? 00:05:05 Workbench cabinet course 00:05:46…

00:00:00 Good Morning! 00:01:19 Marc’s new shirt (Amazon affiliate link) 00:02:24 Does Marc have a subscription for T-shirts from Amazon? 00:03:23 Ava’s Vanity course is now released!…

00:00:00 Good Morning! 00:01:48 Giving away a SawStop Miter Gauge Live! 00:02:50 WIA Tickets are still available! 00:03:20 New Wood Talk episode is out! 00:03:46 Last week of pre-order…

00:00:00 Welcome Back to the Woodworking Morning Show! 00:03:30 Setting expectations on the live show ;) 00:04:42 Announcements – Wood Talk is Back! 00:05:52 Carbon Method Labor Day Sale…

Bandsaw buying advice, Do I need breadboard ends?, Problems with dowels, Update on wood storage racks, Heavy Duty Vertical Racks, Best representation of wood in video games?

Show Notes: 00:00:00 – Getting Started 00:00:35 – Welcome to TWW Live! 00:01:40 – Nicole’s 3D printed phoenix from FlexiFactory Ava’s favorite toy https://amzn.to/3EKklE7 00:02:27 –…

Show Notes: 00:00:00 – Pre-show 00:00:35 – Welcome to TWW Live! 00:02:00 – Workbench project sale! https://thewoodwhispererguild.com/pro… 00:03:15 – Thanks, Scott!…

It’s been a while! We’re finally getting settled here in Missouri and although the shop isn’t making sawdust yet, Nicole and I are excited to see your beautiful virtual faces. So we’re…

It’s been a while! We’re finally getting settled here in Missouri and although the shop isn’t making sawdust yet, Nicole and I are excited to see your beautiful virtual faces. So we’re…

Live Woodworking Q&A

Live Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A and other nonsense.

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Live Q&A!

Woodworking Q&A

A discussion about tape measures followed by woodworking Q&A.

Woodworking Q&A

Woodworking Q&A and nonsense.

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Live Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A plus some nonsense.

Woodworking Q&A

Woodworking Q&A

Woodworking Nonsense.

Live woodworking Q&A

Woodworking Q&A and stuff.

Woodworking Q&A and other nonsense.

Christmas Recap, Epoxy Floors, Sharpening Frustrations, and Motivation.

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A and silliness

Woodworking Q&A and nonsense!

Woodworking Q&A

Woodworking Q&A and some nonsense.

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A and additional nonsense.

Live Woodworking Q&A

Woodworking Q&A

Fun Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Coffee and Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A

Post-WorkbenchCon discussion and your questions.

Woodworking Q&A

Woodworking Q&A

Woodworking Q&A and other nonsense.

Woodworking Q&A with Marc & Nicole.

Woodworking Q&A and other nonsense.

Woodworking Q&A with special guest, Matt Cremona!

Live woodworking Q&A

Our annual holiday show! Special thanks to MLCS and M-Power Tools for donating to the giveaways! Congrats to all the winners!

We talk about CNC, Router Tables, Finishing, Chisels and Nicole’s latest Quilt!

Your woodworking questions, answered!

A visit from Andy Klein, Black Friday sale and more!

Woodworking Questions and More!

Join us every Friday for some light banter and woodworking questions!

Woodworkers Fighting Cancer Results, Guild Sales, Treats for our Troops, Nicole’s Car Accident and woodworking questions!

Last week of WFC, Guild Sale Update and more woodworking questions!

Marc shows off the finished Under Workbench Cabinet and his sexy dance moves.

Guild sales, shop heating, thoughts on Incra Miter 5000 and when is the next Wood Talk?

Marc and Nicole woodworking without a shop, dust collection, where the name Wood Whisperer came from and more!

We announce the Woodworkers Fighting Cancer build, new WFC auctions and lots of woodworking questions!

WFC 2019 Auction goes live, we answer live woodworking questions and Marc discusses the Under Bench Cabinet Guild project

We announce our new Wood Whisperer Español Channel, WFC update and talk about shop funk!

We take a look at Philip Morley’s Kitchen Table & Clear Vue Mini System.

Marc demos the Woodpeckers 1812 square and Nicole gets a new bot in the chatroom to help moderate.

Woodworkers Fighting Cancer auction announcement and we take a look at some cool lumber from Sawkil.com

Marc talks about new plans for the Rustic Outdoor Table and shows this years WFC project.

Marc takes a look at Woodpeckers One-Time Tool Fat Head Hook Rule – Deadline for ordering is August 19, 2019.

We talk about Jason’s new Instagram account, marketing your business, who is Sam Maloof and the history of master woodworkers.

We recap our AWFS trip, take a closer look at the finished bread box, answer a ton of woodworking questions and give out a free Guild project!

Marc discusses how to read grain direction, shop layout, dust collection, hard wax oils and more!

Marc gives a demo of the M Power Tools CRB7 Router Base and Guide System

Marc is recovering from surgery, but we still did a show! We talk cysts, router bits, AWFS and more!

This week we talk miter saws, blades, paper, rough lumber and future projects!

Join us for an informal chat about woodworking, life and draining your compressor

We show our age in this episode of Friday Live!

Marc talks finishing with HVLP and more!

We talk shop flooring, glue lines, dovetails and more!

We take a look at Woodpeckers adjustable track square and answer lots of woodworking questions!

We take a look at our new apron, discuss finishing cutting boards and more!

Marc might be getting sick and Nicole is already sick, but that’s not going to stop us from having a show!

We recap the book launch at Austin Hardwoods and Marc demo’s Woodpeckers Joiner’s Marking Gauge

We are still packing and shipping out Marc’s new book, but we always have time for Friday Live!

All 6000 copies of Essential Joinery have arrived!

It’s Friday Live in the evening! Can Nicole stay awake? Tune in and find out!

We take a look at the Woodpeckers Dado Set-Up Fixture and Gap Gauge

Andy gives us a demo of his Twin Turbo Vise and we try out a new streaming service!

Marc talks about using Osmo and preparing for his trip to film Jory Brigham. There will be no Friday Live on March 8th.

Marc talks about his favorite topic…what tools you should buy!

Marc demos Woodpeckers Exact-Width Dado Jig.

It’s like Friday Live, but at night.

It was a big giveaway announcement today!

We tried to record a full show but the internet was against us

We had some technical issues today but by take 3 we nailed it

Thank you Patreon supporters for helping Nicole through today’s show!

Marc and Nicole discuss the details of the preorder bonus with his new book Essential Joinery.

Marc takes a look at some of his favorite must-have tablesaw accessories

Marc talks a lot about finishing and we take a look at the Woodpeckers Corner Jig

Marc demos the Powercap Respirator and talks about meat! Not in that order

The unedited version of our Holiday Gift Guide, plus woodworking questions!

Marc shows everyone the Polygauge SS from Woodpeckers

Nicole and Marc have a turkey hangover

Nicole created a Wood Whisperer Amazon Store for the Canadians!

Nicole and Marc dive into a ton of questions this week!

Marc tries to do Nicole’s job and regrets it

Marc and Nicole realize that today is their anniversary.

A quick look at the new Festool cyclone and the news isn’t all that great.

Today we have some fun with a story about our son Mateo and eventually we talk about woodworking.

An early show because we’re not going to be around on Friday.

Finishing talk and a new camera.

The usual Q&A and fun!

After a long break, we’re back at it.

On this week’s show, Nicole tells us how she spent her childhood chopping kinlin’. Of course we also have the usual Q&A.

Woodworking and a few brews.

Marc gets stumped more than once!

A look at Marc’s new eye protection and tons of Q&A!

Q&A plus a look at the Gaming Coffee Table.

We’re back from our trip to New Jersey and we’re ready to talk some woodworking!

Design inspiration, prototyping, and tons of other topics!

This week, we’re talking about trolling, kashi farts, and your burning questions!

Today we’re talking about the epoxy fad, compression bits, fast frame and panel construction as well as MANY other topics.

A Friday LIve PM show

We will not be able to attend Wood Dust in Australia.

Joinery sizing, kids in the shop, tension wood, and more!

Today we tackle a number of questions including whether or not SawStop breeds complacency.

Where does marc get his t’s and does he have any regrets!

Nicole gives some shocking electrical advice!

What hand planes do I recommend for beginners as well as a ton of Q&A!

Show notes in progress

One today’s show, we talk about anti-kickback pawls and why you don’t often see people use them. All that and more.

Are bigger shops always better shops? That topic and many more on today’s Friday Live.

Another fun and exciting Friday Live PM Edition!

Today we’re talking about some of our goals for the upcoming year.

This week we’re talking about what makes a spokeshave differ from a cabinet scraper, as well as tons of other topics from the Q&A.

Woodworker gift ideas as well as answer your woodworking questions!

Today we discuss the Incra 5000, HVLP Turbines, reaction wood, and many other topics.

What rasps make up a good starter set as well as lots of Q&A.

Today we’re talking about the properties of Japanese chisels and how they compare to their Western counterparts. We’ll also have the usual Q&A.

This week we discuss the magic of the shoulder plane, as well as a bunch of Q&A.

Today I talk about some finish samples I made up as well as many other topics from the chat room.

Today we’ll discuss why we put gloss under matte, my sanding routine, scaling down projects, and many more topics in the Q&A.

Tonight we have a bunch of great questions, including someone who wants to know what I consider to be must-have layout tools.

Today we drink coffee and lots of it. We’ll also discuss some woodworking!

The Jack Plane can be incredibly useful an for some it might be the only plane they need.

Today we’re discussing router bits: a good beginner set as well as the difference between up and down-spiral.

I show off my new toy from MLCS and we’ll discuss things like jumpy sanders, letting kids into the shop, and even Nicole’s work history.

Today we’re discussing how often I sharpen as well as how you can help support victims of Hurricane Harvey.

My custom tool hangers on my tool wall as well as the upcoming Guile FREE tier.

Today I show you some frames I worked on with Matt Cremona and I discuss my recent miter saw experience.

We have a special guest for today’s Friday Live PM Edition: Matt Cremona.

Today, Marc is feeling sick and Nicole thinks it’s funny!

Showing off some awesome stuff sent to us by our online friends!

Today we’re doing a quick review of our AWFS experience and then it’s on to questions.

Various glues and when to use them! Of course, we have a bunch of other Q&A and antics.

Today we discussed cherry and its tendency to blotch as well as the various aspects of running a woodworking business.

A fun discussion about the journey vs the destination plus lots of other Q&A.

Today we’re talking about a range of topics including why I don’t think you should build a table out of construction grade Douglas Fir.

Today we talked about the differences between classic and more modern workbenches (MFT, Paulk, etc) as well as the difference between up and down-spiral bits.

How to apply oil finishes, how to repair a wobbly box, and beer!

Benefits and disadvantages of larger vs smaller tablesaws as well as the reasons why folks give us their hard-earned money.

Today we show off the new background in the shop!

Today we’re discussing what various plane blade angles do as well as the benefits and drawbacks of wood slides.

James King’s Monster C Clamp & Finishing Purpleheart

Home-based businesses and whether you should take project or technique-focused classes.

The proper way to use a miter saw as well as my favorite stationary sanders.

Why Metric chisels are good and we help someone work through their fears after a near-mishap in the shop.

This month’s giveaway is a massive package of goodies from VerySuperCool Tools. We also discuss my favorite rasps as well as shop security.

The benefits of using Bloxygen and are brushless motors are worth the investment?

Today we’re talking about sharpening micro bevels as well as a bunch of Q&A topics.

Today I show you some early results from the Wiping Varnish Shootout I’m working on.

We talk about the properties of walnut lumber and proper router direction.

Learn how I level chair legs and stay for the Q&A!

Today we discuss bandsaw blade options as well as jointer cutterheads.

A little SketchUp preview of the upcoming Trestle Table build as well as your questions!

A thread tap demo, a parallel clamp shootout, and your questions!

Refinishing Risks & Negotiating Shop Time plus a bunch of other topics and your questions!

A look at the new shop and your questions!

Farmhouse Table & Dust Gorilla plus your questions!

Today we’re talking about sloped shop floors and floor pads, as well as a bunch of other Q&A topics.

We’re talking insurance for the shop, dovetail saws, air drying lumber, and of course a bunch of questions from the audience.

3M WorkTunes Bluetooth and Calavera Tool Works as well as a bunch of questions from the audience.

Torsion box table design, my initial impressions of the DeWalt FLEXVOLT table saw, and a possible trip to the Kansas City woodworking show.

Friday Live – American Green Lights LEDs, WFC Results, & Outdoor Finish Comparison

Arcade cabinet project, some cool LED lights, and your questions answered!

The garage still isn’t a “shop” yet but we have some new DeWalt Flexvolt tools to check out. I discuss the reason behind my beard and I also talk about how I get my “free” tools.

A live discussion from the new Colorado garage.

Q&A Live from the Sonoran Woodshop.

New Channel, Shop Move, New Shop Plans plus many more of your questions!

WIA Recap, 10th Anniversary, & Guild Sale

Are woodworking forums are dead or dying? My scrap wood collection and is reclaimed wood is a good material for learning projects.

TWW Mugs, Powermatic’s new CNC offerings, countersink bits, Grandfather Clock update, and quartersawn white oak.

My completed boxes, flocking, barrel hinges, Narex tools from Taylor Toolworks, and your questions!

Hybrid Woodworking , the Convertible Bench, cool router sign, jewelry box preview, and an ocarina solo!

Check out the cool (and expensive) parts I ordered for the upcoming Grandfather Clock build plus your questions!

Differences between compressor-driven HVLP and turbines, a new stain product, and some new clamps from MicroJig.

An 8.5 hr live broadcast showing how to build a Kids Table & Chair Set, all to benefit Woodworkers Fighting Cancer.

Another awesome TWW Live featuring news, demos, and your questions!

Tommy Mac Scraper kit, Shinto Rasp vs Auriou, MFT Thin Rip Stop and your questions!

Nicole is pregnant and not happy but she’s still giving away some sweet tools for June’s giveaway!

Epoch Wood Sandpaper, Tried & True Finishes, giveaways, and rabbets!

Woodartstry.com tools, Stop Loss bags, and the double mortise and tenon joint!

It’s our yearly holiday party, loaded with free giveaways and good cheer!

Wood vs metal planes, setting up a plane blade, restoring old planes, lunchbox vs 15″ planer, forever tools, and the latest news from the woodworking world!

WFC announcements, mass exodus at Pop WW, new Benchcrafted hardware, Powermatic’s new drill press, a sneak peak at the upcoming charity build, and live Q&A.

The latest new and information from around the woodworking world, as well as woodworking Q&A!

My recommendations for a basic woodworking tool kit and some tips for taking near-professional photographs of your woodworking projects.

Wood movement, breadboard ends, and sprung joints. Plus, a variety of news and information from around the web!

Fuji and Arbortech Giveaway, Senco nail gun review, WoodWorks Season 5, Bessey/Lowes Clamp Frenzy, Adam Savage, a Leatherman case, and Makers vs Woodworkers.