Multi-Function Mobile Cart For Festool MFT

Video - January 17, 2020

Festool makes some great tools and accessories but they are usually geared toward the mobile craftsperson. One such tool that has been a game-changer for me in terms of how I process sheet goods is the Multi-Function Table or MFT. The unit is loaded with work-holding features but because it needs to be mobile, it’s fairly light and features fold-out legs similar to a card table. I really wanted something more stable. Furthermore, there are a lot of tools and accessories that go hand in hand with the MFT and it would be nice to have storage for those things right next to the MFT. With all of this in mind, I designed my Multi-Function Cart for Festool MFT.

While this cart is obviously purpose-built for the MFT, it’s also quite useful for non-Festool woodworkers. It can easily function as a mobile assembly table, a mobile work cart, or you can raise the height a bit and have a very serviceable outfeed table.

Stuff I Used (Shop these affiliate links to help support the show)

4″ Locking Casters
Toggle Clamps
Rubber Feet for the Toggle Clamps
Amana Countersink Bit
Self-Centering Bits
Full Extension Slides: 3 pairs 16″, 1 pair 18″, 1 pair 22″
4 Drawer Pulls

The Plans

Please feel free to download this small Free Version of the Plan. If you need more detail and want to really dig into this project, you’ll want to purchase the full plan.

Mobile MFT Cabinet Plan
$15.00 Add to cart

Discussion

Richard K Jones January 20, 2020 6:35 pm

I forgot how much I enjoy your work. I am going to use your basic design and create an outfeed/mtf table. Thanks for the free plans-Richard

Reply
Billy Ballard January 23, 2020 7:26 pm

I love this idea. I use my mft as my primary work bench due to limited space. It’s not stable and I’m always running back and forth to get clamps, pencils, etc. Question….could this be built with dominos instead of the dados? I just don’t like cutting dados.

Reply
Todd H January 28, 2020 7:51 pm

It is “so choice”!

Reply
AJ January 29, 2020 5:53 am

Quick question …. does this cart maintain the MFT table at the same height as it would if you were using the MFT on its own with the legs unfolded? I ask because I use my MFT as an outfeed table for my table saw which sits on a shop made mobile cart. I built that cart to keep the the table saw at the same height as the MFT.

Reply
- Marc Spagnuolo January 29, 2020 12:16 pm
  
  I wasn’t too concerned about that so didn’t allow for it. The table height ended up around 34 1/2″. If you’re building something like this, you’ll want to do the calculations based on the casters you use and modify the plans accordingly.
  
  Reply
jim gore February 25, 2020 5:51 am

Trying to download pdf. Cutlist/Plan will not download. All the rest of the sketchup and metric Cutlist download fine. Anybody else have this issue? thank you!

Reply
- Marc Spagnuolo February 25, 2020 7:30 am
  
  Seems to be working fine.
  
  Reply
jim gore February 27, 2020 5:06 pm

When I built your guild chop saw station (which is awesome) in the plans you had dimensions for the height to make a jig to screw in the slides for drawers. Do you have them for this some where? thank you! Your work is greatly appreciated.

Reply
jim gore March 2, 2020 5:23 am

I finished the build. Putting the drawers in at the right height was humbling but it all worked. Thank you great idea to build this functional cart.

Reply
- Marc Spagnuolo March 2, 2020 11:56 am
  
  Send in a picture so we can put it up in the gallery. https://www.thewoodwhisperer.com/contact/
  
  Reply
Matt Schorr March 6, 2020 11:51 am

I don’t see the plans…help?

Reply
- Marc Spagnuolo March 6, 2020 4:31 pm
  
  Sorry about that. I was in the process of reworking the plans and integrating them into our store. The Free sample plan is now available as well as the full premium plans.
  
  Reply
DAN KILEN March 23, 2020 11:02 am

I want to modify this plan to build two separate cabinets, one for each of my MFT tables. The plan is to make the footprint the same as the tables so I can use as outfeed /infeed or put them together for an assembly table. Has anyone done something like that? I am fairly new at this but wondering why you used dado cuts instead of Domino? I have the Domino 500 and made a cabinet for my Dewalt contractor saw with 3/4″ plywood using 6 by 40 dominos

Reply
- DAN KILEN March 23, 2020 11:18 am
  
  I don’t need space for my CT 26 because I bought the CT workcenter for extra organization and “hose management” :) so I believe I can build in drawers and shelves even while making the foot print smaller
  
  Reply
Russ May 20, 2020 6:59 am

Do the purchased plans include a Sketchup model?

Looking forward to this build, because it’s been on my list for quite some time.

Reply
- Marc Spagnuolo May 22, 2020 11:30 am
  
  They do not. But if you email me after purchasing I can email it to you.
  
  Reply
Chris Blair November 3, 2020 7:52 am

The use of the toggle clamp is real genius.

Just bought the plans – downloaded no problems.

Have enjoyed your videos – you are an excellent teacher.

I will be doing the dadoes and rabbets with a router, so some advice on that would be appreciated.

Thanks from Australia.

Cheers

Chris

Reply
Ash Majumdar April 8, 2022 3:26 pm

Hi Mark,
Question..You have always had a state of the art Cabinet Saw. Do you still use your track saw with your Mft/3? Or just as a clamping station for Sanding etc.

Reply
- Marc Spagnuolo April 8, 2022 8:13 pm
  
  I actually don’t use my MFT much at all. I still use the track saw all the time but for whatever reason, I’ve found other solutions to the jobs the MFT does.
  
  Reply

Cookie	Duration	Description
cookielawinfo-checbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

Multi-Function Mobile Cart For Festool MFT

Stuff I Used (Shop these affiliate links to help support the show)

The Plans

Mobile MFT Cabinet Plan

Advertisers