Ken’s Workshop – Shop Tour

This week’s we are featuring Ken’s Workshop. Let’s check it out as he gives us the grand tour.

I thought I would send you some shots of my home shop. I have been a hobbyist woodworker for the past 10 or so years. Not only is my shop a wood shop but it is where I fix all the household stuff. Lamps that stop working, bikes, etc. Come on into my shop. It is down two flights of stairs in the basement, it’s the door on the right, photo #1. It is 12′X12′ square with a 7′ ceiling. I have an ongoing battle with the house furnace that takes up about a 3′ square patch of the room. Needless to say I think it would be classified as a “small shop”. I have built a king size bed as well as two large rolling storage cabinets for a school in the shop but most of my work is much smaller. CD/DVD cases, boxes, coffee and side tables, etc.

Photo #2 & 3 are shots looking through the door into the shop. All of my tools are either bench top or able to move around the shop so I can accommodate larger pieces of wood. This includes my Delta contractor saw which I can spin around to face the door and out feed wood through the door using roller stands as out feed support if needed. I have a bench top craftsman drill press that sits on its own shop built rolling stand.

In photo #4 there is my King Canada 6″ jointer, Ryobi bench top belt/disk sander and tucked under my bench is the router table. The cabinet in the corner is an old kitchen corner cabinet that has a lazy susan inside that holds all my finishing products as well as sand paper and household paint. The two wall cabinets (again from our old kitchen) hold miscellaneous parts for machines as well as books and magazines.

Photos 5 & 6 are shots of my bench. It is about the simplest bench that could be made. Using 2X4s and a maple veneered chip board top. When the top gets too beat up, I flip it over and then replace it all together when that side gets destroyed. Hanging on the wall are some of my hand tools. Some “C” and spring clamps as well as a light hanging from a bar above the bench. On the bench are two recently finished CD cases and a lift lid box that are Christmas presents for family. In photo #6 is my Steal City hollow chisel mortiser. It sits on another old kitchen base cabinet. This cabinet holds stuff that I can’t find another place for. Beside that is my Dewalt thickness planer. I have passed lots of board feet through this machine. The chip collection for the planer is a garbage pail inside the shop-built cabinet that the planer sits on.

Photo #7 & 8 are looking from the bench back to the door and the table saw. The wall cabinet holds mostly household stuff, light bulbs etc. My other hobby is mountain biking and the top red tool chest holds all my bike related tools parts. The bottom rolling cabinet holds hand power tools as well as the majority of my hand and marking tools. Hanging on the wall above the table saw is my Ryobi scroll saw. As I don’t have a band saw, the scroll saw doubles as my band saw with major limitations. I hate to throw out any wood except for the smallest pieces. I have my off cuts scattered around the shop and all my larger pieces of lumber stored either in an outdoor shed or in a small storage space under the stairs.

The last photo shows where I store my bar clamps. All my quick grip clamps hang off the cold air return on the furnace. The shop has gone through several makeovers in the last ten years and one of the projects for the New Year is another shop make over. All the old kitchen cabinets are going to go and I am going to build floor to ceiling cabinets to house all the stuff. I am also planning on building a new bench, most likely a torsion box style but I am still working on the plans for that. As you can see it is a small space but one of the things I really like about it is I am only a few steps away form anything in there. Thanks for taking a tour of my shop!