Episode 13- Bandsaw Set-up/Tune-up

30 Responses to “Episode 13- Bandsaw Set-up/Tune-up”

1. Scott Martin on March 31st, 2007 2:45 pm

   Wanananana - Nanananana - Nanananana - Nanananana

2. thewoodwhisperer on March 31st, 2007 2:59 pm

   I can’t understand you when you speak in slow motion like that. :)

3. Herman on March 31st, 2007 5:20 pm

   Marc, Could you please elaborate more on the dry lubricant you used on your new “drool” bandsaw you have aquired.

4. Mark on March 31st, 2007 7:08 pm

   Wonderful tips Mark. I tune band saws for a living and you have some very good advice.

5. Jim on March 31st, 2007 7:38 pm

   So did Powermatic hook you with with the sweet saw? *Jealous*

   Just got a craftsman 14″ a while back. My fist BS, so some of the things you may consider common sense are new to me. Thanks for going through the setup. (shopping list; T-9 Boeshield, renaissance wax, silicon carbide stone :)

6. thewoodwhisperer on March 31st, 2007 7:53 pm

   The dry lubricant I use is Super Lube and I got it from Lowes. It goes on wet and dries within seconds. Good stuff.

7. Geoff on March 31st, 2007 11:14 pm

   You’re a drummer???

8. thewoodwhisperer on March 31st, 2007 11:31 pm

   You know it! Kept me sane in college. :)

9. McKay Sleight on April 1st, 2007 4:01 pm

   I have five bandsaws (1 14″ powermatic–my own) and 4 (2 Laguna’s, 1 Yates-American and one Ricon) at the school that I teach wood working. Your information is good and accurate. I prefer the ceramic guides of the Laguna. The carter on the Yates-American is adequate. The Ricon sucks. It would be nice to have the time to do all that you suggest. But alas, most of the time I am not sure what my name is. It reminds me of an old wood worker and wholesale wood salesman that had a triple exposed picture of a rooster that said, “I am so confused that I do not know where to put my pecker”. Thanks for the good work.

10. Darryl on April 1st, 2007 5:15 pm

    nice episode! it again shows how your show is so completely different than any other woodworking show I’ve ever seen! Keep up the great work.

    Now I need to go out and get myself a bandsaw so I can put all these tips to good use!

    …oh and I hope Nicole didn’t beat you too bad for poking her!

11. Jeff Jackson on April 2nd, 2007 7:49 am

    Marc,
    What blades do you put on your bandsaws for resawing? BC Saw? WoodSlicer? Lennox? Laguana? What has been you best performer?

    Thanks,

    Jeff

12. thewoodwhisperer on April 2nd, 2007 7:59 am

    I like Lennox, but that is primarily because David Marks always used Lennox and I like their cut quality. I occasionally play with Timberwolf blades as well. THe other brands you mentioned all have great reputations too, so I would not recommend against them. In general, as long as you stay away from the cheapie brands, you can’t really go wrong.

13. Frank on April 2nd, 2007 1:10 pm

    Marc,

    Excellent job. This is actually one of the best videos that I have seen regarding tuning up a band saw. I will be sure to pass it along.

    One final comment, I understand Woodcraft also sells something equivalent to “Silicon Carbide Stone,” but they call it a “Blade Tuning Stone.” :o)

    Frank

14. Charles Beland on April 3rd, 2007 6:16 pm

    Mark,
    i can’t watch the videos at all. I am using Firefox browser. I have Windows XP, quick time, & windows media player.

15. thewoodwhisperer on April 3rd, 2007 8:11 pm

    Hey Charles. There are two ways to view the videos, either right on the page with the flash video, or either one of the two quicktime MP4’s. If you have updated versions of your browser and Quicktime, you should be able to see the files. If not, there could be any number of reasons why. And unfortunately that goes a bit beyond my troubleshooting expertise. You can always try to download ITunes and subscribe to the show that way. The videos will all play withing ITunes.

    Sorry you are having difficulty.

16. Lance Chase on April 5th, 2007 5:42 pm

    Marc, I want to thank you for this pod cast on tune up for band saws. I went and made all the adjustments to my band-saw after watching it and ,what do you know, It actually can re saw wood now with out drifting. Even with my bad eyes I was able to re saw a piece of willow with little to no drifting. Again I thank you.
    Lance
    (charger1966)

17. nick on April 9th, 2007 12:06 pm

    concerning blade width, wouldnt a 3/4 inch blade give you even better results in regards to cutting uber thin veneer?

18. thewoodwhisperer on April 9th, 2007 1:57 pm

    Hey Nick. Some folks certainly do believe that the wider blades would be better for thin veneer. From my experience, I have seen little difference in cut quality between 3/4″ and 1/2″ blades. So since 1/2″ blades are cheaper, I stick with the 1/2″. Plus the 1/2″ blades are more versatile in terms of cutting tighter curves.

19. Thomas Porter on April 11th, 2007 10:06 pm

    One of the things I was waiting for you to talk about with regard to the bandsaw blade tension was detensioning the blade after use. I always seem to forget to do that, and I’ve been told it is better for the saw and the blade to do so. Is this something you practice?

20. thewoodwhisperer on April 12th, 2007 8:46 am

    Hey Thomas. I personally think it depends on your usage. If you use the saw at least once a week, (or just spin the tires a half turn), I dont see any issue leaving the bandsaw tensioned. And unless you have a quick release mechanism on your saw, tensioning and detensioning every time can be a real pain as well as lead to an inaccurate tension setup. I know you can count the number of turns, but after a while, that going to get pretty old. So call me lazy, but I usually dont worry about it too much.

21. brian on April 23rd, 2007 7:18 pm

    Marc, great site and I love the videos. You showed how to fold the blade, but what I was waiting for was the safe way to unfold the blade. I don’t have a bandsaw yet (but I’m always keeping an eye out for a deal!), so maybe unfolding a blade is not a big deal.

22. Chris Norman on July 5th, 2007 1:14 am

    Hi from the wood mimer ie i’m just getting back into it. thanks for your inspiration

23. Dawg on September 10th, 2007 9:28 am

    Great Podcast, you do a great job of adding touch of humor to the woodworking, and not to mention that you offer very good informaiton.

    I see that you got the Super Lub at Lowes, where did you get the other items (T-9 Boesheild, Silicon Carbide Stone and Renaissance Wax)?

    Thanks and keep up the good work.

24. Mike Kunkel on October 30th, 2007 7:18 am

    It’s generally a very bad idea to start a bandsaw before adjusting the guides. This can often lead to destroyed blades and/or bearings. We have come across many bandsaws that the owners believed to be no good, only because the owner never adjusted the guide bearings and they were severely damaged as a result.

25. Jordan on November 23rd, 2007 9:32 pm

    I saw this video when it first came out, but didn’t own a BS at the time. This past week I assembled my new BS and thought I’d gotten it set up good enough. Alas I was mistaken and disappointed when I tried to slice my first veneer. So I watched this video again it was a tremendous help in understanding the concepts. Back to the owners manual with this knowledge, and in about an hour I’d gotten the blade tracking properly, set the bearing guides correctly, lubed my blade, and sliced some veneers that while not quite perfect, were so much closer to what I expected that now I’m ecstatic with my new purchase. Thanks so much Marc…I might have gotten it done without your help but it never would have been as easy as it was.

26. Mike Kapotsy on December 30th, 2007 3:55 pm

    I have a 14″ Powermatic bandsaw. The tire keeps coming off the upper wheel and I cannot seem to keep it from doing it. The guards keep it on but this is making my saw unusable for fear the blade will jump off. Why is this happening and what can I do to prevent it?

    Also, the saw was in storage from some time and developed quite a bit of surface rust on the table. What is the best method for removing this surface rust and cleaning the table up to a smooth clean surface?

    Thanks! Mike K.

27. thewoodwhisperer on December 30th, 2007 4:29 pm

    Hey mike. If the tire is actually coming off, I am afraid there is a serious problem. A tire should be fit so snugly that its a real pain to get off. I hope you meant that the blade keeps coming off. If it is the tire though, I would not hesitate to call Powermatic and get their tech service to help you out. That’s an unusual issue.

    Now if the blade is popping off, there are only so many things that could cause it. And most of those things were covered in this video. You blade should be free of any kinks. The tracking should be set so that the blade stays on the tire. And the the guides should be set properly. Also, the upper and lower wheel should both be in the same plane. So run a long straight edge to confirm this. Now if you’ve set all this right, the blade should track properly. If it doesnt, check everything again. :)

28. thewoodwhisperer on December 30th, 2007 4:31 pm

    Oh and for the rust, I like to use the same treatment as I described in this video. Only start by using some sand paper and WD-40 to remove the heavy rust. I might go as low as 180 or 220 grit if the rust is really bad. Then wipe it down with mineral spirits and proceed through the rest of the process from the video.

    Hope that helps.

29. Mike Kapotsy on December 30th, 2007 8:32 pm

    Marc,

    Thank you so much for the reply and so quickly! Well unfortunately I did mean the tire is coming off. As I mentioned, it was in storage for a year or so and I think the tire is getting old. It has a few spider cracks when you look at it really close. I was reading on some websites after I posted my question where the tires are typically glued on with a type of adhesive. I was hoping your answer would be I need to reapply some adhesive. Can I just order a replacement urethane tire or rubber one and throw the old one away? Which type would you recommend?

    Thanks for the info on the table also. I will have to use some sandpaper for sure because it’s got quite a bit of surface rust. The bandsaw was my father’s and he purchased it in 1999. Up till now it has worked great for me.

    I appreciate your help! Mike

30. thewoodwhisperer on December 30th, 2007 9:06 pm

    Wow. That is scary Mike. Replacing the tires sounds like a great idea to me. Now i have never needed to use adhesive with my tires, but I have heard of people doing that. Truthfully, I would only do it if you notice the new tire slipping. And I would not try to salvage the old tire. Rubber is rubber and as you no, time and weather are not rubber’s friends.
    I have never used them, but if I were replacing my tires I would buy these:
    http://www.rockler.com/product.....;sid=AFN86

    And if they fit nice and tight, then skip the adhesive for now. Of course there may be some logical reason to apply the glue anyway that I’m not aware of…… And with those new tires, I bet that thing will perform like a champ!

    Good luck.

Got something to say?