In the second and final part of our tablesaw setup series, we continue our quest for fine tuning. Topics include setting the blade bevel angle, adjusting fence alignment with the blade, adjust fence so that it is square to the table, setting up the insert, and lining up the splitter.

And at the end, you will get a nice full view of the new saw. For those who are curious, it is a PM Custom from the folks at Wood Werks Supply.

Back to Part 1

Our tools are no good to us if they aren’t tuned up properly. As the “heart” of the workshop, its crucial that our tablesaws are configured to perform their best. So whether you are setting up a new saw, or tuning up your current one, this video guide will get you where you need to be. Part 1 covers three different methods for aligning the miter slot to the blade as well as a simple technique for attaching and leveling the extension wings.

I am sure you will also notice that this is a new sexy tablesaw. For those who are curious, it is a PM Custom from the folks at Wood Werks Supply. And even a big fancy saw still requires a good bit of setup and tweaking.

Go to Part 2

***The following clip was cut from the original video. Since the topic of table saw flatness came up in the comments, I decided to throw the clip out there as bonus footage. Enjoy.

In this episode, I review my 3-step method for sharpening card scrapers. The card scraper is a great time-saving and money-saving tool. But one thing that baffles many woodworkers is how to sharpen them. Fortunately, its really not as hard as it seems. Check out the video and you’ll see what I mean. Now if you need more information on how to use a card scraper, check out this helpful video on FineWoodworking.com by Brian Boggs.

In this episode, I cover the basic setup and tuneup of one of the coolest tools in the shop: the bandsaw. Whether you plan on cutting veneer, re-sawing lumber, or cutting curves, the quality of the cut will improve if your bandsaw is properly tuned. Learn how to properly tension the blade, set the guides, adjust for drift, as well an many other tips can tricks. Having trouble deciding what blade to buy? I’ll help you with that too!