In the final part of our series, Aaron puts the finishing touches on the trunk lid. If this is your first experience with SketchUp, I highly recommend checking out the tutorials located at SketchUpForWoodworkers.com.

You can download SketchUp here and if you are looking for the original file used to make this Steamer Trunk tutorial, you can download that here. Also, check out the SketchUp Group on the Community Site. There is a growing list of models there available for download.

In part two of our three part series, Aaron shows us how to make the frame parts for the top of our lid. Now these videos do assume that you’ve opened the program and have a little familiarity with the tools. If this is your first experience with SketchUp, I highly recommend checking out the tutorials located at SketchUpForWoodworkers.com.

You can download SketchUp here and if you are looking for the original file used to make this Steamer Trunk tutorial, you can download that here. Also, check out the SketchUp Group on the Community Site. There is a growing list of models there available for download.

Its no secret that Google SketchUp is a very popular program amongst woodworkers. Considering what it does, its incredibly easy to use. But it can still be intimidating to someone who is using it for the first time. So with the help of my buddy Aaron Marshall, we put together a few videos showing how to construct the square lid to the Steamer Trunk. Now these videos do assume that you’ve opened the program and have a little familiarity with the tools. If this is your first experience with SketchUp, I highly recommend checking out the tutorials located at SketchUpForWoodworkers.com.

Another thing you might want to check out is an older video I did showing how I typically use SketchUp. I rarely design an entire project from start to finish. I just use SketchUp to work out proportions and measurements. And you’ll see me do that in the first episode of the Arts & Crafts Table series.

You can download SketchUp here and if you are looking for the original file used to make this Steamer Trunk tutorial, you can download that here. Also, check out the SketchUp Group on the Community Site. There is a growing list of models there available for download.

Let me know if you would like to see more videos on SketchUp.

For the very first time on The Wood Whisperer, we are going to build a full piece of furniture. I had a commission recently for a beautiful Arts & Crafts table made of alder. Only problem was, I needed to get it done quickly. And unfortunately, trying to film a podcast at the same time would prove detrimental to my promised time-frame. But since I felt this was a great project for you to see, I filmed as much as a I could and as fast as I could. So if things look a bit rushed or not as polished as usual, cut me a little slack.

Here’s the final cut list: Table Top: 36″W x 72″L (4) Legs: 29 1/4″L x 3″W x 3″T (2) Long Aprons: 64″L x 3 1/2″W x 3/4″T (4) Short Aprons: 28″L x 3 1/2″W x 3/4″T (8) Side Slats: 16 1/4″L x 3″W x 1/2″ T

Note: I will be using the Festool Domino to construct this entire project. If you plan on cutting traditional integral tenons for this project, please include 3″ extra length on all apron pieces for 1 1/2″ tenons, and 2″ extra length on all side slats for 1″ tenons.

In part 1 of this episode, I show you the process that I go through whenever I begin a new project. This involves some educated guesses and the use of SketchUp, a free program that allows you to easily draw 3D renderings.