A New York Community Workshop - Shop of the Week
This week’s shop is submitted by Todd. Let’s check his place out and see what he has to say:
“I have a somewhat unusual workshop. I work at a place called 3rd Ward, which is a resource for creative people of many kinds, in the Bushwick neighborhood of Brooklyn. There’s a woodshop, but there’s also a metal shop, a computer lab, lots of desk spaces for graphic designers and the like, two recording studios, a gallery, and three photo studios (not darkrooms). The woodshop has a very elementary safety primer (which I teach), a furniture design class, a refinishing class, a basic introduction to joinery (which I also teach), and several more classes are developing. The idea is to collect creative people together and build a community so they might collaborate and learn from each other. It’s a good idea, and in practice it has its pros and cons. Here’s a link: http://www.3rdward.com”
“Some of you might be interested in our tools. We’ve got an old 14″ Rockwell Delta table saw that’s a great workhorse with no major issues, and it’s primarily the rip saw. We’ve also got a 14″ Martin sliding saw with 8′ of travel. We have two bandsaws, a 14″ Powermatic, and a big old monster made by IDunnoWho. Two drill presses, a big old one with a head that swings on an arm with two joints (like a shoulder and an elbow, so it has a very deep reach, about 22″ I think), and a small benchtop Ryobi that works just fine for most things. 12″ Dewalt compound chop saw. Combination disk sander/belt sander by Shop Fox that is total crap. Powermatic 8″ jointer, and Enco 15″ thickness planer. 5 workbenches, used for everything from glue-ups to writing documents. You know, workbenches. They’re just 4×4 posts with 1 1/2″ slabs of oak on top, and some bracing. They’re not dead flat, but they’re usually fine. There are also some portable power tools people can use, but I have found it easier and more reliable to have my own. I have a small storage space in an adjacent room, where I keep my rolling cart, some vertical sheet goods, some vertical hardwood, and a bunch of other stuff.”
“There are pros and cons, as I said. The biggest pro is that there are plenty of other people around to ask questions of. Several of the other regular shop users are guys with years of professional experience. The shop manager has worked in cabinet shops for 25 years, and he knows all there is to know about cabinetmaking, also a lot about many other areas of woodworking. He’s also not bad with metalworking and electrical and plumbing and etc. I work alone, and I have no employees, but it’s not hard to find someone to help me lift something. I can turn around and say, “Hey Eric, does this look stupid?” or “Do you have any 2″ cabinet screws, San?” or “How come my finish is dripping, Naresh?”
“The next big advantage is that the rent (actually “membership fee”) is reasonable and I don’t have to buy my own machinery. As a young guy (34) starting a business I’m not 100% confident about, it’s nice not to have a large capital investment in overhead. I don’t get scared if I have 3 weeks without paying work. It gives me a chance to do other things that will help me to learn what my own designs actually look like.”
“The third advantage is that once in a while I get work from other people there. Someone will call the front desk and ask if there’s a woodworker in the house who can make something. Or someone will need help with an installation. Or the situation where a guy did a bunch of design work on a project, which took longer than he thought, and then it was time for him to move away. He passed the fabrication to me.”
“In the con department: Chief among these is abuse of the machinery and the facility. It’s often because students or amateurs using the shop (sometimes for only a day or two) don’t know any better. For example, they rip a 12′ piece of 6/4 oak with the crosscut blade, overheating it and warping it. Often people do dangerous things, like crosscutting a long board with the rip fence. Kickbacks are way too common. No one’s hurt themselves yet, in two years, but I think it’s only a matter of time. Some of the regular shop users, professionals and semi-professionals, can be tough on the place too, like when they leave a dusty layer of overspray all over in the spray room. There’s even the factor of non-shop users who borrow things and don’t return them. We used to have dozens of small clamps. Now there are two. The rest, I suspect, are in the tool kits of photographers who have used the photo studios.”
“Another con is that, with people working together, come office politics. You know about this if you’ve ever had a job of any kind. People bicker when they spend time together, and petty issues blow up. Last, we’re out of space. Under financial pressure, the place has had to find space for more users and sell more memberships. It’s more crowded than it was, and it’s getting worse. There are more classes now too. That means teaching opportunities for guys like me, but it also puts a drain on the space.”
“My whole time there, two years, I’ve constantly considered moving out and setting up my own space somewhere. I always settle down to the idea that the pros outweigh the cons, and it’s better right now not to take a risk and burden myself with overhead. Next week I might change my mind, but right now I’m staying where I am.”
Kiwi Shed - Shop of the Week
This week’s shop comes from Hamish. Let’s see what he has to say:
“Thought you might like to see my little sheds that I use here in New Zealand, I have been really interested in seeing so many different styles and designs of peoples workshops. The thing I have noticed is the passion that people have in designing and building their own space.”
“I started my own business in June 2007, just making work benches and now have expanded to garage and wardrobe systems. I have had no training in joinery or woodworking but have studied in Draughting. Watching The Wood Whisperer has been very interesting. If you noticed I took Marc’s design of the assembly bench to the max size. Its been really handy. Cheers. I will continue to expand into wood working over time. Keep up the good work USA.”
Here is a little more info from Hamish:
The saw is SCM SI-16W Rise & Fall Tilt Arbor Sliding Table Panel Saw
3.2m cut capacity, scorer unit, auto brake. 415v/3ph/50hz.
1500mm rip capacity
3200mm crosscut
5.5hp main motor / 1 hp scriber motor
overhead guard which i have taken off for easier cuting of 2.4 x 1.2 panels
The other big machine is a KD 54 Hot melt Edgebander, this will glue on pvc or wood edging to board or timber, trimmes and cuts egding in one go. very handy. The other machine is a Blum Mini Press which can drill hinge holes into the doors and also has removeable head which can be replaced with a 8 drill spindle head allowing you to drill muiltable holes in a work piece.
The jointer is a toolline 6inch buzzer with 1400mm table good for long pieces of timber only single phase but fine for what i use. I have a little thckness under bench 12inch. handy but only entry level. In the other cabinet shed we have a a horizontial drill press for caming and dowling and compressor and hand tools and very important fridge for lunch. Also as for the question on the legs to by benches I flat pack the benches and send around the country this allows for them to be easily removed the bolted back on. I also have a very Loving and Wise Wife who fully supports me in my work and does keep me from getting to carried away in buying to much stuff. Thanks for the questions hope this helps
Kevin’s Odd Little Workshop - Shop of the Week
This week’s shop comes from Kevin in MA. Let’s check his place out to see why he says its odd:
“My name is Kevin and I’ve been watching your podcast in Worcester MA. I’m sending you these photos of my humble and odd little shop for the shop of the week segment. I’m a beginning woodworker who lives in an old condo building. I love my round living room, but my round storeroom underneath it presents some challenges.”
“I’m trying to use every inch of the weird shaped space I have so I fabricated J-hooks out of scrap to hang stuff from the rafters. there was an inset in the wall where a basement window had been walled off with cinder block, so my Ikea boxes went there. The pegboard is attached to studs that go from the rafters to the workbench. The drill press and scroll saw were purchased when Lowes re-branded everything from Powertech to Kobalt for short money, the Ryobi table saw is usually folded up and has its own nook. The cart I built, a door and two sawhorses are usually dragged into a basement common room that I use for assembly. The Ryobi mitre saw stand and Porter Cable miter saw usually end up in a wide spot in the common hallway. And electrical power is via a long heavy extension cord that I plug in upstairs in my unit. I’m careful to only run one tool at a time.”
“I hate using good wood to make shop fixtures (I’m a Yankee, I’m cheap) and a lot of my tools are from a local used tool store, so the shop fixtures are a little crude, but its all sturdy and mostly recovered lumber or cull lumber pieces from Home Depot.”
“Its dark, dirty, cramped and doesn’t smell great down there, but there are few places I’d rather spend a day off. Thanks for sharing this, and keep the podcasts coming!”
Want your shop posted as shop of the week? Email me your pictures and your story!
Greg’s Woodshop - Shop of the Week
This week’s shop belongs to Greg from KY. Let’s see what he has to say:
“Here are some pictures of my shop, formerly known as our two car garage. I am lucky to have a wonderful wife who has let me pursue my hobby and has been willing to park outside for the past sixteen years. Our four kids do have one corner, but the shop has taken over the rest. We moved last year from AL to KY and the moving company wasn’t going to move my lumber which is mostly oak, cherry and walnut because my new company would not pay to move lumber. I finally came to an agreement with the moving company and they moved “312 pieces of garage shelving:)”.
Keith’s Woodshop - Shop of the Week
This week’s shop is submitted by Keith. Let’s check it out and see what he has to say:
“The shop is about 13×22, it was a garage that was converted into livable space, then converted to a shop by me. As such, it has a separate heating system from the house. The tricky part about laying out this shop was the size of the tools I own compared to the space. The table saw capacity is limited because it had to be positioned so that the rails go around the DC hose. I didn’t want to cut the rails down, surely this won’t be my last ever shop space. I used the Grizzly shop tool to draw up the shop, then made it happen.”
“I added the 220v service by branching off of the dryer, with what I call my ‘mad scientist switch’, a giant disconnect throw so that you can either run the dryer or the shop. This way the shop tools don’t have power most of the time, helping keep kiddies safe since most of my 220v tools don’t have lock-out features. It’s a bit of overkill, but my wife works for an industrial electrical manufacturer, so it was cheap.”
“The shop is a bit of a mess in the photos as I have about 3 projects going on in there at the moment. I think the only thing I’d like to have is a bigger lathe and some more lumber storage. Other than that, this shop is pretty functional.”
The tools:
PM2000 table saw w/ router table in extension
8″ Jet jointer
1 3/4 hp canister dust collector (also jet)
Performax 16-32 drum sander
Dewalt 13″ planer
el cheapo M Power 1018 mini lathe
Jet 18″ bandsaw
Dewalt 20″ scroll saw
Delta 16″ drill press
Makita LS1013 sliding miter saw
Lots of hand held power tools, and a good number of hand tools.
-
Happy Holidays!
-
Subscribe Now!
-
Support the Show
-
My Gaming System
